Product Care Guide
Care That Keeps Water Days Simple
Thoughtful rinsing, complete drying and calm storage help water recreation equipment remain comfortable to handle and easier to prepare. Use this guide as a practical routine for paddle sports, boating, swimming, diving, surfing, floats, waterproof storage and waterfront leisure gear.
Four moments that protect the next outing
Equipment care is most manageable when it becomes part of the activity itself. A short check before launch and a complete reset afterward are more useful than waiting for visible buildup or storage problems.
Inspect Before the Water
Check valves, seams, straps, clips, buckles, tow points, paddle locks, fin boxes and waterproof closures. Confirm that removable parts are seated correctly and that visible wear has not changed how the item functions.
Rinse After the Activity
Use clean fresh water to remove salt, chlorine, sand, mud and plant debris. Give extra attention to zippers, valve areas, mask skirts, fin straps, connection points and textured surfaces where residue can collect.
Dry Completely
Open compartments, loosen straps and separate removable pieces so air can circulate. Dry folds, seams, pockets and rolled edges before packing to reduce trapped moisture and persistent odors.
Store with Shape in Mind
Choose a cool, shaded and ventilated area. Avoid placing heavy objects on boards, fins, masks, inflatable valves or structured flotation equipment, and keep gear away from prolonged heat or direct sunlight.
Match the routine to the construction
Different products respond to pressure, folding, sunlight and cleaning in different ways. Product-specific labels and instructions should always take priority over general guidance.
Inflatables, Rafts and Towables
Keep valve areas clean, follow the product pressure guidance and avoid overinflating in rising heat.
- Dry the underside and valve recess before rolling.
- Use broad, relaxed folds rather than sharp creases.
- Keep repair materials clean, sealed and easy to locate.
Boards, Paddles and Boat Accessories
Remove sand from adjustment mechanisms and support longer items evenly during storage.
- Check rails, edges, handles, locks and connection hardware.
- Do not drag boards or paddles across abrasive ground.
- Store fins and removable hardware where they cannot bend.
Masks, Snorkels and Fins
Protect lenses and soft components from abrasion, distortion and prolonged sun exposure.
- Rinse silicone skirts, mouthpieces and strap channels.
- Avoid abrasive cloths or harsh household cleaners.
- Store masks in a protective shape without pressing the skirt.
Flotation, Dry Bags and Waterproof Protection
Closures, seams and coated surfaces need clean contact areas and complete drying before storage.
- Open pockets and closures while drying.
- Inspect buckles, webbing, seals and roll-top edges.
- Test waterproof protection before placing valuables inside.
Clean for the environment you entered
Salt, chlorine, fine sand, silt and organic material affect equipment in different ways. A careful fresh-water rinse is a useful starting point, but details such as joints, seals, textured grips and fabric folds deserve deliberate attention.
- 01 Move adjustment points while rinsing so hidden residue can release.
- 02 Keep lenses, coated surfaces and soft seals away from abrasive tools.
- 03 Let equipment cool before changing pressure or packing it tightly.
- 04 Separate wet equipment from dry clothing, electronics and repair supplies.
Small adjustments for different water settings
Care routines can remain simple while still responding to the conditions of the day. Focus on what the water and shoreline may have left behind.
Salt Water
Rinse promptly and thoroughly. Work fresh water around metal fittings, zippers, valves, paddle adjustment points, mask hardware and tow connectors before salt residue dries.
Priority: fittings and moving partsPool Water
Rinse swim training gear, masks, fins, floats and protective accessories after use. Avoid leaving damp equipment in a sealed vehicle or closed bag after the session.
Priority: fresh rinse and open dryingLakes and Rivers
Remove silt, plant material and fine debris from seams, fin boxes, footwear, pump connections and boat accessories. Check for small stones before folding or stacking equipment.
Priority: debris and hidden gritBeach and Shoreline
Keep equipment on a clean mat or towel during preparation. Brush away sand before closing waterproof cases, adjusting paddles or connecting inflation and repair accessories.
Priority: clean preparation surfacesA clear reset before and after the water
These checks are intentionally broad so they can support paddle boards, kayaks, inflatables, swimming equipment, snorkeling gear, floats, dry storage and other waterfront essentials.
Before Leaving Home
Preparation should confirm condition, compatibility and completeness before equipment reaches the shoreline.
- Review the item-specific instructions and pressure guidance.
- Inspect seams, straps, valves, closures and connection points.
- Confirm that fins, paddles, pumps, adapters and repair items are present.
- Keep dry storage, waterproof protection and flotation equipment accessible.
- Separate clean equipment from sharp or abrasive objects during transport.
Before Putting Gear Away
Storage begins only after residue, moisture and pressure have been addressed.
- Rinse surfaces, closures, hardware and hidden recesses with fresh water.
- Dry both sides, including folds, pockets, handles and valve areas.
- Release or adjust pressure only as directed for the specific product.
- Record damage or missing parts so they are addressed before the next outing.
- Store in a cool, shaded and ventilated place without heavy compression.
Useful answers for everyday maintenance
General care should remain gentle, consistent and appropriate for the material. Product-specific instructions always come first.
Contact SupportCan I use household cleaners on water sports equipment?
Use only cleaning methods suitable for the product material. Clean fresh water is often the first step. When additional cleaning is permitted, choose a mild solution and avoid bleach, strong solvents, abrasive powders or stiff tools unless the product instructions specifically approve them.
How dry should equipment be before storage?
Exterior surfaces, seams, pockets, folds and enclosed areas should feel dry before packing. Open closures and separate removable parts while drying so moisture does not remain trapped between layers.
Should inflatable equipment be stored rolled or inflated?
Follow the storage instructions supplied with the item. When rolling is appropriate, clean and dry the product first, protect the valve area and avoid sharp folds. Do not place heavy objects on the stored roll.
How should I protect mask lenses and soft silicone parts?
Rinse them carefully, keep abrasive sand away from the lens and allow the mask to dry in shade. Store it without crushing or sharply folding the skirt, and use only compatible lens or defog products.
When should straps, lines or connectors be replaced?
Look for fraying, cracking, deformation, loss of elasticity, damaged stitching, unreliable clips or changes in normal operation. Replace components according to the product guidance rather than waiting for a complete failure.
What should I do when I find a puncture or damaged seam?
Remove the item from use, clean and dry the area, identify the material and follow a compatible repair method. Do not apply an unverified adhesive or patch where damage may affect structural function, pressure retention or a critical connection point.
Clean gear. Clear storage. Easier preparation.
A consistent care routine makes it easier to see what is ready, what needs attention and what should be repaired before the next paddle, swim, snorkeling session or relaxed day by the water.
This page provides general care guidance. Always review and follow the instructions, warnings, pressure limits, cleaning directions and storage requirements supplied with the specific product.